MOVIE

PRODUCT DETAIL

  • Lid comes with a rotating plug that opens easily and prevents drinks from spilling while on the go. Without bumps and screws, and the rim being thin and smooth, you can drink comfortably with or without the lid. 
  • Double walled stainless steel tumbler prevents heat transfer with a vacuum between its inner and outer walls. The foil layer covering the inner wall reflects heat back inside, contributing to excellent heat and cold retention. 240ml: Hot above 65°C/149°F (1 hr), cold below 10°C/50°F (1 hrs) 360ml: Hot above 75°C/167°F (1 hr), cold below 10°C/50°F (3 hrs)
  • High quality stainless steel maintains the rich flavor of drinks. Smooth electro-polished interior prevents odors and stains. Powder coat finish on the surface prevents scratches.
  • Fits into espresso machines, coffee makers, and drink holder of cars. Tumblers can be stacked and carried for outdoor use.
  • Detachable silicone ring, it is very easy to clean. 
Personalizable

TO GO TUMBLER 240ml with plug

¥3,520(tax included)

Colorwhite/ No.20431

Size
Quantity
Engraving (+¥550 ~)
SPECIFICATIONS
BPA free
Cold insulation
Heat retention
carbonated drinks allowed
Dishwasher safe

φ87 x H95 mm / 240 ml / about 180 g
*height (without cap) H82 mm

CARE INSTRUCTIONS

Capacity: 0.24L / Materials: Stainless steel, PCT resin, silicone rubber / Heat-resistant temperature: 100℃ / Dishwasher safe / BPA-free / Made in China / Heat retention: 65℃ or higher (1 hour) Cold retention: 10℃ or lower (1 hour) *Heat retention effect refers to the temperature of hot water measured 1 hour after pouring boiling water into the product at a room temperature of 20°C ± 2°C, and when the water temperature reaches 95°C ± 1°C, with the lid on. *Cold retention effectiveness refers to the temperature of water measured 1 hour after pouring cold water into the product at a room temperature of 20°C ± 2°C and placing the lid on the product when the water temperature reaches 4°C ± 1°C. *Before adding drinks, add a small amount of hot (cold) water and preheat (pre-cool) for about 1-2 minutes to increase the heat retention (cold retention) effect. ○Do not use in the microwave or oven. ○Do not place near fire. ○When using the product in a dishwasher, avoid storing it in a way that puts pressure on the product and place it on top of the device. ○Infants. ○Do not drop or subject to strong impact as this may cause damage or water leakage. ○If you put too much drink in, the drink may leak or the lid may float due to the internal heat. Please be careful not to overfill as this may cause the liquid to boil over. ○If you close the lid forcefully, the drink may squirt out, so please do so slowly with the spout open. ○If you close the lid incorrectly, If the lid is not strong enough, the liquid inside may leak, so please make sure it is closed securely. ○Even if you close the lid, it will not be sealed, so do not carry it lying down with the contents inside. ○Do not carry the container with a drink in it in a bag, etc. ○Do not hold the lid when carrying the container as this may cause the container to fall off the lid and cause damage. ○When opening the lid, do not carry it around. It will be easier to open if you lift it up while moving it to one side. ○Please be careful when opening the lid with the contents inside as it may cause the drink to spill or cause burns. ○Due to the double structure, the parts that you touch will not be hot. The drink inside may be hot, so please be careful not to get burned. ○Drink slowly and do not tilt the product too quickly as this may cause burns. ○Leave it in a high temperature place such as inside a car. ○Do not leave the contents inside for a long time as this may cause rust or spoilage of the beverage. ○Do not use for beverages containing citrus fruits as it may deteriorate due to the terpenes contained in the peel of citrus fruits. Please do not do this. ○Thin lines may be noticeable on the surface of the lid, but they occur during molding and are not cracks. ○To prevent stainless steel from rusting, remove dirt and moisture as soon as possible, dry thoroughly, and ○Do not leave it in water as it may cause rust or damage. ○Do not use cleanser or scrub brush when cleaning. ○Do not use chlorine as it may cause rust. Do not use bleach-based agents. ○If there are rust-like spots inside the container, add lukewarm water and approximately 10% citric acid, wash with a soft sponge after 2-3 hours, and rinse thoroughly.

User Manual
  • The design and text shown on the screen is a simulation.
    Actual color and position of the engraving may differ.
TO GO TUMBLER 240ml with plug
Choose product color
Color : white
Engraving type
close up
Enter text
  • 0/0
  • 0/0
  • 0/0
  • The number of characters that can be entered varies by tumbler.
  • Enter alphabets (uppercase), numbers, or symbols (* / & . : % ! ? -).
  • You can enter just the first line. You cannot enter just the second line.
  • The designs and characters displayed on the screen are simulations. The color and position of the engraving may differ from the actual product.
TO GO TUMBLER 240ml with plug
Color
white
Engraving type
Unselected - Unselected
Text
not entered
¥4,070(tax included) (Product Cost ¥3,520 + Processing Fee ¥550)
Terms and Conditions
Finished Product
- Stainless steel tumblers are laser engraved, and resin bottles are UV printed. Colors may appear differently on the actual product depending on the light and angle.
- Due to the nature of the processing machine, uneven color, blurring, partial blurring, and streaks like brush marks may occur.
- Print on resin bottles may come off if the bottles are wiped with alcohol or ethanol solution, or if they are used in a dishwasher or with a scrubbing brush or abrasives.
- Laser engraving is semi-permanent, but the print on plastic bottles may fade or peel due to friction.
- The print on plastic bottles may occasionally become stuck to the packing bag due to humidity or temperature during shipping. In this case, please peel it off slowly without pulling strongly.
- The engraving will be applied to the front side of the bottle. Stainless steel tumblers have the KINTO logo on the opposite side of the engraving.
- Please note that the center of the print and the center of the handle may be misaligned depending on the tightness of the lid.
- The size and position of the engraving and print are determined by the shape of the body.
- The color of the engraving and print is determined by the color of the body.
- The design and text displayed on the screen is a simulation. Actual color and position of the engraving and print may differ.
- The actual position and color of the engraving and print may appear different depending on your monitor or browser environment.
- Depending on the color of the product, the engraving and print may be difficult to see.
- The position and color of the engraving and print may slightly vary even if you purchase multiple pieces of the same color.
- As each item is handmade, there may be slight distortions or deviations.
- This service is only available at the time of purchase and cannot be applied to products that have already been used.
- We do not accept cancellations after an order has been placed.

Order Quantity
For orders of 10 or more pieces, please contact us using here inquiry form.

Payment
We accept the following payment methods.

Credit card payment
[Accepted credit cards]
We acept Visa, Mastercard, American Express, and JCB.
Please clickhere.

Smartphone Payment
[Accepted smartphone payments]
We accept smartphone payments (Safari: Apple Pay, Chrome: Google Pay, PayPay, LINE Pay, Merpay).
At KINTO STORE Tokyo and KINTO REC STOE Tokyo, we accept cash, credit card, transportation IC, ID, and QUICPay.

Shipping
- Orders are usually shipped within 2 to 3 business days after the order is placed.
- We will not be able to ship on Saturdays, Sundays, national holidays, New Year's holiday, and Obon holidays. 
- We do not accept overseas shipments or shipments to overseas shipping agents.
- Depending on long holidays and store congestion, the shipping schedule may change.
*If you place an order at KINTO REC STORE TOKYO, you can pick up your order at the store 2 business days after you place your order. Details will be provided by store staff at the time of order.

Returns and Cancellations
- All customized products are original products made for the customer. Please note that we do not accept returns, changes, design modifications such as color or text, or cancellations.
- We do our best to ensure the quality of our products, but if you find any defects in your order, please contact us within 7 days of receiving your order using our contact form.

Design Content
The design created by the customer must not use words or expressions that violate public order and morals (e.g., abusive words, insulting or discriminatory expressions, inappropriate slang, expressions that incite violence, etc.), and must not be copyrighted by a third party. KINTO Co., Ltd. is not deemed to infringe on trademark rights, design rights, or other legal rights, and will not be held responsible in the event of a dispute with the right holder. Additionally, processed designs that include quotations of brand names, product names, service names, company names, store names, copyrighted works, etc., or partial quotations that are associated with these examples, cannot be used. KINTO Co., Ltd. has the right to invalidate your order due to the content of the processed design, such as violation of terms and conditions.
I agree to the above and add to cart.
TYPEA
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
TYPEB
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
TYPEC
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
TYPED
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
TYPEE
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
TYPEH
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
TYPEL
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
TYPEF
TYPEG
TYPEI
TYPEJ
TYPEK
IDEAS SAMPLE

    STYLING GALLERY More